As a general rule, use more teeth for thin material and fewer teeth for thicker material. This blade is ideal for cross-cutting aluminum, brass, copper, lead sheets, bar stock, medium to hard plastic, MDF, single-sided laminates, and particleboard. Original Saw Company recommends this blade for the 16” Super Duty Metal Cutting Radial Arm Saw and the 16” Beam Saw.

• 16” Blade
• 100 Tooth
• Carbide teeth for non-ferrous cutting
• 1” bore
• 0 Degree Hook
• .150” Kerf
• Made in America

The post 16″ Aluminum Crosscut Blade for Radial Arm Saws and Beam Saws appeared first on Original Saw Company.

As a general rule, use a blade with more teeth for thin material and fewer teeth for thicker material. This blade is ideal for cross-cutting aluminum, brass, copper, lead sheets, bar stock, medium to hard plastic, MDF, single-sided laminates, and particleboard. This blade is recommended for the Original Saw Company 20” Super Duty Metal Cutting Radial Arm Saw and the 20” Beam Saw.

• 20” Blade
• 120 Tooth
• Carbide teeth for non-ferrous cutting
• 1” bore
• -5 Degree Hook
• .164” Kerf
• Made in America

The post 20″ Aluminum Crosscut Blade for Radial Arm Saws and Beam Saws appeared first on Original Saw Company.

As a general rule, use more teeth for thin material and fewer teeth for thicker material. This blade is ideal for cross-cutting aluminum, brass, copper, lead sheets, bar stock, medium to hard plastic, MDF, single-sided laminates, and particleboard.

• 22.5” Blade
• 120 Tooth
• 1” Bore
• Carbide teeth for non-ferrous cutting
• .187” Kerf
• -5 Degree Hook Angle
• Made in America

The post 22.5″ Aluminum Crosscut Blade for Radial Arm Saws and Beam Saws appeared first on Original Saw Company.

The 12” General Purpose Blade is ideal for crosscutting and ripping dry soft and hardwoods.  Use this blade with the Original Saw Company Contractor Duty Radial Arm Saw.

• 12” Blade
• 36 Tooth
• 1” Bore
• Carbide Teeth
• 0 Degree Hook Angle
• .165” Kerf
• Made in America

The post 12″ General Purpose Blade for Radial Arm Saws appeared first on Original Saw Company.

The 12” Fine Crosscutting Blade gives excellent cutting results on an Original Saw Company Radial Arm Saw. The negative tooth design reduces saw “grabbing.” This blade is ideal for cross cutting hardwood, laminated material, MDF, plywood, and veneer. Use the Fine Crosscutting Blade with the Original Saw Company Contractor Duty Radial Arm Saw.

• 12” Blade
• 60 Tooth
• 1” Bore
• Carbide Teeth
• -2 Degree Hook Angle
• .134” Kerf
• Made in America

The post 12″ Fine Crosscutting Blade for Radial Arm Saw appeared first on Original Saw Company.

The negative tooth design reduces saw “grabbing.” This blade is ideal for cross cutting hardwood, laminated material, MDF, plywood, and veneer. Utilize this blade with the Original Saw Company 14” Heavy Duty Radial Arm Saws and Crosscut Power Saws.

• 14” Blade
• 40 Tooth
• 1” Bore
• Carbide Teeth
• -2 Degree Hook Angle
• .165” Kerf
• Made in America

The post 14″ General Purpose Blade for Radial Arm Saws and Crosscut Power Saws appeared first on Original Saw Company.

The negative tooth design reduces saw “grabbing.” This blade is ideal for cross cutting hardwood, laminated material, MDF, plywood, and veneer. Utilize this blade with the Original Saw Company 14” Heavy Duty Radial Arm Saw and Crosscut Power Saws.

• 14” Blade
• 60 Tooth
• 1” Bore
• Carbide Teeth
• -2 Degree Hook Angle
• .148” Kerf
• Made in America

The post 14″ Fine Crosscutting Blade for Radial Arm Saws and Crosscut Power Saws appeared first on Original Saw Company.

Use this blade with the Original Saw Company 16” Heavy Duty or Super Duty Radial Arm Saw, 16” Crosscut Power Saws, and 16” Beam Saws.

• 16” Blade
• 40 Tooth
• 1” Bore
• Carbide Teeth
• -2 Degree Hook Angle
• .165” Kerf
• Made in America

The post 16″ General Purpose Blade for Radial Arm Saws, Crosscut Power Saws and Beam Saws appeared first on Original Saw Company.

The negative tooth design reduces saw “grabbing.” This blade is ideal for cross cutting hardwood, laminated material, MDF, plywood, and veneer. Choose this blade for the Original Saw Company 16” Heavy Duty or Super Duty Radial Arm Saw, 16” Crosscut Power Saws, or 16” Beam Saws.

• 16” Blade
• 60 Tooth
• 1” Bore
• Carbide Teeth
• -2 Degree Hook Angle
• .165” Kerf
• Made in America

The post 16″ Fine Crosscutting Blade for Radial Arm Saws, Crosscut Power Saws and Beam Saws appeared first on Original Saw Company.

The negative tooth design reduces saw “grabbing.” This blade is ideal for cross cutting hardwood, laminated material, MDF, plywood, and veneer. Choose this blade for the Original Saw Company 20” Super Duty Radial Arm Saw, 20” Crosscut Power Saws and 20” Beam Saws.

• 20” Blade
• 60 Tooth
• 1” Bore
• Carbide Teeth
• -5 Degree Hook Angle
• .184” Kerf
• ATB
• Made in America

The post 20″ General Purpose Blade for Radial Arm Saws, Crosscut Power Saws and Beam Saws appeared first on Original Saw Company.