The Beam Saw (single phase with 64″ crosscut) is a vital tool to boost production.

Weighing in at 1500 pounds, the Beam Saw is manufactured from cast iron, cast aluminum, a box tubing beam, and a steel frame. Due to its durability, customers can use this hefty machine for two to three work shifts per day in an industrial setting. In addition to the many hours, this saw can “work,” the 16” Beam Saw’s powerful motor allows the Beam Saw to cut several pieces of material at a time. 

Beam Saws cut a variety of materials. Choose this saw to cut metal, wood, aluminum, steel, and other kinds of materials. These saws are effective for crosscutting and bevel cutting. The model 3691-01-01 can cut 5” deep in a single pass. It also has a crosscut of up to 64″ on 1” stock.  

This model of Beam Saw features a VFD (variable frequency drive) and is made to withstand years of industrial cutting. This model in the Beam Saw series features VFD technology. Using the VFD increases the speed of the blade by over 8 seconds. Because of the VFD, this saw has a slower, smoother start-up. The VFD also slows and stops the saw over approximately 25 seconds to allow for consistent braking times. 

The post 16″ Beam Saw (single phase with 64″ crosscut) appeared first on Original Saw Company.

The 16″ Beam Saw (3 phase with 64″ crosscut) is crucial for speeding up production.

This massive machine, weighing 1500 pounds, is made from cast iron, cast aluminum, a box tubing beam, and a steel frame. Use a Beam Saw in production for two to three work shifts per day in an industrial setting.

The model 3691-01-03 can cut 5” deep in a single pass and has the crosscut capacity of 64″ on 1” stock. Its powerful motor lets the Beam Saw cut several pieces of material at a time.

Do you have the capability to run 3 phase power at your location? If so, this is the model you want. 3 phase power creates a smoother motor start-up. There tends to be less maintenance and longer service life with no relays or capacitors inside the motor. 

The post 16″ Beam Saw (3 phase with 64″ crosscut) appeared first on Original Saw Company.

The 20″ Beam Saw (3 phase with 62″ crosscut) model 3691-01-05 is the ultimate machine for industrial cutting.

This big saw weighs 1500 pounds and is constructed of cast iron, cast aluminum, box tubing beam, and a steel frame. Due to its durability, industrial facilities can use this hefty machine for two to three work shifts per day.

This Beam Saw can cut 7” deep in a single pass and has the crosscut capacity of 62″ on 1” stock. Its powerful motor allows the Beam Saw to cut several pieces of material at a time.

Do you have the capability to run 3 phase power at your location? If so, this is the model you want. 3 phase power creates a smoother motor start-up. There tends to be less maintenance and longer service life with no relays or capacitors inside the motor.

The post 20″ Beam Saw (3 phase with 62″ crosscut) appeared first on Original Saw Company.

22.5″ Beam Saw (3 phase with 60″ crosscut) model 3691-01-07 is the largest saw manufactured by Original Saw Company. This Beam Saw model weighs in at 1500 pounds.  It is constructed of cast iron, cast aluminum, a box tubing beam, and a steel frame. Use this Beam Saw to make repeated cuts in an industrial setting.

This Beam Saw features a massive 8” depth of cut in a single pass and has the crosscut capacity of 60″ on 1″ stock. Model 3691-01-07 can also bevel cut a full 4″. This machine will withstand years of industrial cutting. With a powerful 7.5 HP motor, the Beam Saw can simultaneously cut several pieces of material.

There are several factors to consider when assessing whether a Beam Saw suits your facility and cutting needs. Read about “Things to Know Before Buying a Beam Saw” to make informed decisions about the purchase.

22.5″ Beam Saw Sets Itself Apart from the Rest

The 22.5″ Beam Saw (3 phase with 60″ crosscut) model utilizes a Variable Frequency Drive (VFD) to control the arbor motor. Using the VFD allows the speed of the blade to increase over 8 seconds, which results in a smooth start-up. The VFD also slows and stops the saw over approximately 25 seconds to allow consistent braking times. 

The Industry Standard in Cutting

Beam Saws are utilized in a variety of industries. With its generous depth of cut, 60” crosscut on 1” stock, and powerful 7.5 HP motor, many companies take advantage of its versatile features. Industry leaders in various specialties operate 22.5″ Beam Saw (3 phase with 60″ crosscut) daily in repeated shift work. Find Beam Saw in industries such as: 

• logging
• canopy manufacturing 
• curtain wall 
• metal roofing
• the military
• steel buildings
• panel production
• conceptual model production

Do you have the capability to run 3 phase power at your location? If so, this is the model you want. 3 phase power creates a smoother motor start-up. There tends to be less maintenance and longer service life with no relays or capacitors inside the motor.

The post 22.5″ Beam Saw (3 phase with 60″ crosscut) appeared first on Original Saw Company.