Loading...

16″ Beam Saw (single phase with 64″ crosscut)

$14,842.69

  • 7.5 hp 3 phase TEFC (totally enclosed, fan-cooled) motor with single phase input VFD (variable frequency drive)
  • 60 HZ
  • 208 or 230 volt motor
  • 64” crosscut on 1″ stock
  • 5” depth of cut
  • Automatic Electro-Mechanical Brake
  • Manual Chain Crank Crossfeed
  • Magnetic Starter with Low Voltage Controls
  • T-slot Extruded Metal Table
  • Manual Clamping
  • Extruded Aluminum Fence
  • Complete Upper and Lower Blade Guarding
  • Replaceable Track
  • ON/OFF Push Buttons with E-Stop
  • Powder Coated Steel Frame and Legs
  • Wrench Kit
  • Made in the USA
Loading...

Description

Why Invest in a Beam Saw from Original Saw Company?

The Beam Saw (single phase with 64″ crosscut) is a vital tool to boost production.

Weighing in at 1500 pounds, the Beam Saw is manufactured from cast iron, cast aluminum, a box tubing beam, and a steel frame. Due to its durability, customers can use this hefty machine for two to three work shifts per day in an industrial setting. In addition to the many hours, this saw can “work,” the 16” Beam Saw’s powerful motor allows the Beam Saw to cut several pieces of material at a time. 

Beam Saws cut a variety of materials. Choose this saw to cut metal, wood, aluminum, steel, and other kinds of materials. These saws are effective for crosscutting and bevel cutting. The model 3691-01-01 can cut 5” deep in a single pass. It also has a crosscut of up to 64″ on 1” stock.  

This model of Beam Saw features a VFD (variable frequency drive) and is made to withstand years of industrial cutting. This model in the Beam Saw series features VFD technology. Using the VFD increases the speed of the blade by over 8 seconds. Because of the VFD, this saw has a slower, smoother start-up. The VFD also slows and stops the saw over approximately 25 seconds to allow for consistent braking times. 

 

Additional information

Weight 1500 lbs
Dimensions 112 × 52 × 52 in
Motor

5 hp 1 phase TEFC (totally enclosed, fan cooled) motor

Product Length (Inches)

Product Width (Inches)

Product Height (Inches)

Cuttable Material

, , , , , , , ,

Max Crosscut

Max Depth Cut

Can do the following cuts

,

Capable of Rip Cuts

Voltage Options

,

Phases of Voltage Available

Pneumatic Clamping Ability?

Powered Feed Option?

Ordering & Shipping

Manufacturing of Beam Saws happens after the customer orders. Machines are considered custom and made voltage specific. If you are unsure about the power requirements of your location, please get in touch with an electrician.

Because some cutting applications are custom and specific, our team may contact you about your purchase. It is our priority to build a saw that fits our customers’ needs.

Beam Saws are assembled and tested in our facility. After being test run, the saw is packaged and placed on a skid. The legs are attached to the skid. This makes setup and installation easy.

When the saw is delivered, simply:

  1. Lift the machine.
  2. Install the legs and braces.
  3. Wire in the mag starter.
  4. Install the saw blade of your choice.

 

These machines have provided cutting solutions to thousands of manufacturing companies throughout the world. Count on everyday repeatability and accuracy for years to come.

  • Setup Machine Height – 62” (1575 mm)
  • Setup Machine Depth – 100” (12540 mm)
  • Approximate Shipping Weight – 1500 lbs
  • Approximate Shipping Dimensions – 102”x52”x48”

Reviews

There are no reviews yet.

Be the first to review “16″ Beam Saw (single phase with 64″ crosscut)”

Your email address will not be published. Required fields are marked *

  • 64” (1626 mm) maximum crosscut from 1” stock
  • 5” (127 mm) maximum depth of cut
  • 2” (50 mm) maximum depth of cut at 45 degree bevel
  • Cut Table Height - 34 ½ ” (876 mm)

Features that are important to Beam Saw owners are power and a variety of cutting options.

Due to these features, many Beam Saws are found in the following industries:

  • Curtain wall
  • Metal roofing
  • Panel production
  • Steel buildings
  • Conceptual model production
  • Canopy manufacturing
  • Logging

The type of blade required for a Beam Saw depends on the material being cut. There are several carbide blade options for Beam Saws.

When cutting wood, consider the following blades:

  • 16″ General Purpose Blade for Beam Saws – 40 tooth
  • 16″ Fine Crosscutting Blade for Beam Saws – 60 tooth

When cutting metal, use:

  • 16″ Steel Crosscut Blade for Beam Saws – 300 tooth
  • 16″ Aluminum Crosscut Blade for Beam Saws – 100 tooth

Blades are sold separately from the saw.

Saw Accessories

Saw Parts

Testimonials

Check Out Our Product Video

Do You Need Test Cuts?

Are you unsure if this machine can cut your material?

Ask about sending in a material sample to Original Saw. We will cut your material on our shop saw and make a video. Afterwards, you can review the videoed test cuts and make informed decisions. Most importantly, we want you to feel comfortable with your solutions before your purchase.

Would you like to send us your material?

Email us at customerservice@originalsaw.com or call at (800) 733-4063 to start the process.

Compatible Saw Accessories

The Beam Saw comes standard with a manual chain crank carriage feed and a T-slot extruded metal table with manual clamps.  Many customers choose to upgrade their Beam Saws with accessories. 

  • Make a Beam Saw a semi-automatic machine by adding on the Electronic Powered Cross Feed. Enable cutting by simply pushing a button.  
  • Add pneumatic clamping to speed up processes. Customize pneumatic clamping for specific applications. Choose from two clamp systems or a specialized six clamp system.
  • Upgrade the T-slot table with an HDPE Black Plastic Table Insert Kit. Table inserts are ideal when cutting smaller pieces.