Saw Accessories

Wood and metal cutting accessories are add-ons to your saw that make your life and production line less complicated.

We carry several accessory options such as Dust Shrouds, Rip Conversion Kits, Mist Coolant Systems, Pneumatic Clamping Systems, and Electronic Powered Cross Feed Systems. Learn More

Categories
Accessories Categories
Size of Blade
Size of Blade
Compatible with
Compatible Parts
Filter
Categories
Accessories Categories
Size of Blade
Size of Blade
Compatible with
Compatible Parts
4' Saw Measuring System with a Fixed Foot and attachment hardware.
measuring-system-fixed-foot
Measuring System with Fixed Foot
$360.49$1,038.23
Select options This product has multiple variants. The options may be chosen on the product page
8' Saw Measuring System with a Flip Foot and hardware to attach.
measuring-system-flip-foot
Measuring System with Flip Foot
$360.49$1,038.23
Select options This product has multiple variants. The options may be chosen on the product page
6' Fence Rail Kit and mounting hardware can be attached to a table to help keep material lined up and secure.
fence-rail-kit
Fence Rail Kits
$122.45$233.58
Select options This product has multiple variants. The options may be chosen on the product page

Wood and Metal Cutting Accessories

Backside of a Dust Shroud that is mounted on a Radial Arm Saw.
At Original Saw Company, we strive for simpler and safer cutting solutions.

Original Saw Company’s Wood and Metal Cutting Accessories are great additions to your line of cutting equipment.

Listed below are some common questions we receive about our cutting solutions. 

Woodworking Accessories

dust shroud

The Dust Shroud connects to the back of the frame behind the saw blade and collects dust when the saw makes straight and bevel cuts.  In fact, this dust shroud has a 4″ dust port connection for easy attachment to many dust collection systems.  During cutting, a laser cut grid covers the port and prevents large pieces of debris from entering the dust collection system.

Dust Shroud on Radial Arm Saw - Front View

All wood cutting radial arm saws and beam saws can be equipped with a dust shroud.  On a radial arm saw, the dust shroud mounts at the rear of the frame and behind the blade.  Beam saw dust shrouds mount inside the frame.

Dust Shroud on Radial Arm Saw - Rear View

Rip Conversion Kit

The Rip Conversion Kit contains attachments and guarding to allow 12”, 14” and 16” wood cutting saw models to rip cut.  First, the motor swivels parallel with the fence.  Next, it enables wide boards to be cut in narrower pieces.

Metal Cutting Accessories

Mist coolant system

Wood cutting radial arm saws and beam saws use Mist Coolant Systems. They provide lubrication when cutting non-ferrous material like aluminum and, most importantly, extend the life of the blade.  Consequently, if a Mist Coolant System isn’t used, aluminum will fill the gullets of the blade and cause inefficient cutting.

The Mist Coolant System works with a siphon delivery system.  It contains a 7” flexible plastic nozzle, sight gauge and independent air and coolant controls for a variable spray delivery.  Additionally, compressed air and 110 volt power are required for use .

Pneumatic clamps hold the Mist Coolant System in place in order to it make easy to attach or remove the system.  Mist Coolant Systems are an optional feature on all Metal Cutting Super Duty Series Saws and Beam Saws.

Wood and Metal Cutting Accessories

Pneumatic Clamping Systems

Pneumatic clamping creates opportunities to make your cutting more efficient.  Two or four cylinder systems allow you to customize how you want to hold the material down. Original Saw’s Pneumatic Clamping System is a wood and metal cutting accessory. 

It integrates with our Heavy Duty Series, Super Duty Wood Cutting Series, Super Duty Metal Cutting Series and Beam Saws to allow for a variety of cutting and clamping options.

Pneumatic Clamping Systems

 

  • Front pushing clamps make it possible to clamp the material back against the fence.  The front pushing cylinders are mounted on adjustable slide carriages with a locking handle to adjust to any material width.
  • Over fence cylinders clamp the material against the table top and are mounted behind the fence.  To clarify, when material is not clamped, they are fully behind the fence.  This allows for clear loading and unloading of the machine.
  • Combine the front pushing and over fence clamping for a custom clamping system.
  • Overarm clamps hold down multiple pieces.
Pneumatic Clamping System (2 Cylinders, front pushing)900500-00
Pneumatic Clamping System (4 Cylinders, front pushing and over fence)900500-01
Pneumatic Clamping System (overarm clamp & front pushing for cutting and clamping multiple pieces of material at one time)900500-02
Pneumatic Clamping System (2 Cylinders, over fence)900500-03
Pneumatic Clamping System for 3600 Series Beam Saws (4 Cylinders pressing down, 2 Cylinders front pushing)900502-05
Pneumatic Clamping System for Crosscut Power Saw (2 cylinder)2003400.50
Pneumatic Clamping System for Crosscut Power Saw (4 cylinder)2003400.52

Pneumatic Clamping Systems are required to be purchased with a saw.  They are not sold individually.

Electronic Powered Cross Feed

When using a manual saw, the user pulls the carriage through the material that is being cut. When a semi-automatic saw is ordered from our factory, an Electronic Powered Cross Feed option is added to the saw.  If the saw is semi-automatic, the carriage is controlled by the push of a button. The remote mounted control panel contains an arbor motor start/stop station, e-stop, carriage forward and reverse buttons, variable speed adjustments and an on/off lighted selector switch. This video shows a Beam Saw with an Electronic Powered Cross Feed and a remote mounted control panel.

Yes! The length of cut or carriage travel is adjusted by the cam stops.  The Electronic Powered Cross Feed provides the optimum feed rate for the material to be cut.  Most importantly, it assures uniform cuts and maximum utilization of the blade for efficient cutting.

This Electronic Powered Cross Feed is only available at the time of purchase of a Radial Arm Saw.  Contact customer service for assistance when choosing an Electronic Powered Cross Feed.

Do You Need Test Cuts?

Are you unsure if this machine can cut your material?

Ask about sending in a material sample to Original Saw. We will cut your material on our shop saw and make a video. Afterwards, you can review the videoed test cuts and make informed decisions. Most importantly, we want you to feel comfortable with your solutions before your purchase.

Would you like to send us your material?

Email us at customerservice@originalsaw.com or call at (800) 733-4063 to start the process.